LTECH DALI-36-200-1200-U1P1

LED Intelligent Driver • 2~36W • 200~1200mA • 10~54Vdc

  • Dimming interface: DALI, Push Dim
  • PWM digital dimming, no alter LED color rendering index.
  • Standard DALI logarithmic dimming curve.
  • Dimming range: 0~100%, LED start at 0.1% possible.
  • Multiple current, wide voltage, compatible with a variety of LED lights.
  • Non-load output voltage 0V to prevent damages to LED caused by poor contact
  • Short circuit / Over-heat / Over load / Non-load protection.
  • DALI bus standard: IEC62386-101, 102, 207.
  • Class 2 power supply. Full protective plastic housing.
  • Compliant with Safety Extra Low Voltage standard.
  • Suitable for indoor environments

Specifikationer

Dimming interface DALI (IEC62386)
Push/Dim
Input voltage range 100-277Vac ±10%
Frequency 50/60Hz
Input current 0.45A@115Vac, 0.25A@230Vac
Power factor PF>0.97/115Vac, PF>0.93/230Vac, at full load
THD ≤16% at 115Vac, ≤20% at 230Vac, at full load
Efficiency [icont type=”angle-right”]88%
Inrush current Cold start 20A at 230Vac
Control surge capability L-N: 1kV
Leakage current [icont type=”angle-left”]0.5mA/230Vac
Operating voltage 10-54Vdc
Output power range 2W~36W
Current accuracy ±3%
Max output voltage Max. 58Vdc
Non-load output voltage 0Vdc
PWM frequency ≤4KHz
Dimming range 0~100%, LED start at 0.1% possible
Working temperature tc: 75°C ta: -30°C ~ 55°C
Working humidity 20 ~ 95%RH, non-condensing
Storage temperature/Humidity -40 ~ 80°C, 10~95%RH
Temperature coefficient ±0.03%/°C(0-50°C)
Vibration 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

Power/Voltage/Current

Output power Output voltage Ouput current
2W-10.8W 10-54V 200mA
3.5W-18.9W 10-54V 350mA
5W-27W 10-54V 500mA
6W-32.4W 10-54V 600mA
7W-36.4W 10-52V 700mA
9-36W 10-40V 900mA
10.5-36.75W 10-35V 1050mA
12-36W 10-30V 1200mA

Protection

Over-heat protection Shut down the output when PCB temp.≥110°C.
Auto recovers when temp. back to normal.
Over load protection Shut down the output when rated power≥102%~125%.
Auto recovers when the load is reduced.
Short circuit protection Shut down automatically if short circuit occurs.
Auto recovers after faulty condition is removed.
Non-load Protection Shut down the output if no load.
Auto recovers when load back to normal.

Safety and EMC

Withstand voltage I/P-O/P: 3750Vac
Isolation resistance I/P-O/P: 100MΩ/500VDC/25°C/70%RH.
Safety standards IEC/EN61347-1
IEC/EN61347-2-13.
EMC emission EN55015
EN61000-3-2 Class C
IEC61000-3-3
EMC immunity EN61000-4-2,3,4,5,6,8,11
EN61547

Others

Dimension 175×44×30mm (L×W×H)
Packing 178×48×33mm (L×W×H)
Weight (G.W.) 175g±10g

Connections

DALI Connection

Push/Dim Connection

LTECH DALI-36-200-1200-U1P1

LTECH DALI-36-200-1200-U1P1 00 000 00
Ladda hem produktblad

Short press = on/off control

Dimming memory: brightness will be the same as previously adjusted when turning off and on again.

Long press = stepless dimming

Every other long press: the light level goes to the opposite direction.